ESD Testers
ESD Audit Test Kit (Heavy Hammer type Surface Impedance Tester)
Model: 499ZC
This battery operated portable instrument is used for measuring Surface Resistivity of virtually any surface. In the electronics industry products such as packaging materials, component storage bags and trays, work bench surfaces, table and floor mats, conveyor belts, etc., have resistance values which need to be conformed to specific standards. Moreover, these values are expected to fall within specified limits. The Surface Impedance Tester plays a vital role in monitoring and checking the resistivity characteristic of these items.
The surface resistivity is displayed on digital display. User can recognize the tested material whether it is conductive, dissipative or insulative as it covers the wide range from 102.5 to 1013.5 ohms/square
- Testing by putting on the surface to be tested
- Testing voltage switches automatically
- Various testing modes can meet different testing requirement.
- LCD display, easy to read.
- Chargeable battery (via USB Adaptor)
- 499ZC Suface Impedance Tester
- 2xHeavy Hammer type Electrodes
- Grounding Cord
- Power Adaptor
- Instruction Manual
Top-of-the-line Digital Wrist Strap & Footwear Combo Tester
Model: 492GNA
This top-of-the-line Combo ESD Tester is according to GJB 3007-97, SJ/T 10694-2006 and ANSI ESD S20.20 standards. It can test ESD wearing status quickly and conveniently of the Wrist Straps and the ESD Footwears (feet loops, conductive footwear and antistatic footwear). Practical measurement range is 100kΩ~1GΩ which is adjustable with accuracy of less than 10%.
- Has 2 Test Modes:
- Single Test Mode: checks the ESD status of Wrist Strap or Footwear.
- Comprehensive Test Mode: checks status of both Wrist Strap and Footwear.
- Touch screen type LCD Display
- Customer can connect it to Door Control System thru Access System Control Signal from this ESD Tester.
- Uses mini-current testing for stable and accurate results.
- RS485 interface to record data for controlling and checking.
- Combo Tester Model 492GNA
- AC Coupling Adaptor 8~12 VDC
- Foot Plate
- Platform
- Supporting Pole
- Grounding Wire
- Connecting Wire Assemblies
- Connector for interfacing
- Test Recording Paper with Clips
- Instruction Manual
This Combo Tester can be connected to Door Control System thru Access Control System Signal from this Tester. Required connector is provided with this Combo Tester
- Interfacing for door access will have to be done by the customers only
- Tester will only provides signal to operate the door access mechanism
Charge Plate Monitor for Testing Static Eliminators/Ionizers
Model: 432A
This product is a precision instrument specialized in measuring the static elimination ability and ion balancing of static eliminators (such as ionizing fan, ionizing air rod, ionizing air gun, etc.).
- 4.3-inch TFT touch screen, clear display, simple operation.
- During the test, the voltage change curve of the charging board can be viewed in real time.
- Functions of "PASS" judgement, result storage and result file export.
- Functions of one-click screen shots, file deletion and export.
- Personalized setting: users can set the working mode of the charge plate monitor according to their own needs.
- Large-capacity rechargeable lithium battery, which can be used without external power supply.
- Non-contact sensor, high test impedance and precision, good stability.
- Simple structure, easy operation and convenient carrying
- Charge Plate Monitor Model 432A
- AC Coupling Adaptor
- Foot Plate
- Grounding Wire
- Instruction Manual
High End Digital ESD Static Charge Tester
Model: I431
Measures static charge on ESD Floors/Table Mats/Wrist Straps/Hand Gloves/ESD Bags/other ESD items
- 4 Working Modes
- Functions:
- Static Field Measurement
- Ion Balance Voltage Measurement - Potential measuring modes: Instantaneous value and peak value of static potential
- Easy to use, test distance adjustable
- Pocket design, easy to carry
- Power Supply : 9V DC Battery
- Display : LCD with simultaneous display of cursor and range
- Static Testing Range :
- Low 0 ~ ±1.5 kV,
- High 1 ~ ±22kV - Ion Balance Test Range : 0 ~ ± 220 V
- Standard Distance needed : 25 mm (± 0.5mm)
- Testing Accuracy : ±(10% + 1 digit)
- Standby Current : <3uA
- Operating Current : <15 mA
- Dimensions : 125 x 70 x 25 mm (approx.)
- Weight (approx) : 200 grams
- Digital ESD Static Charge Tester
- Testing Plate (for ion balance)
- Grounding Line
- 9VDC Battery
- Manual
How can you be sure your ESD Area is really ESD safe unless you measure it actually.
Non contact type high end digital ESD Static Charge Tester Model I431 measures static charge on ESD Floors / Table Mats/ Wrist Straps / Hand Gloves / ESD Bags / other ESD items.
Wrist Strap Tester
Model: ISM498
Simply touch circular surface on Tester with your hand and connect ground wire. In case of a safe ground, LED will be ‘Green’. Opposite Table summarizes test indications.
- Use anywhere to check personnel ESD grounding quickly
- Checks contact resistance between Wrist Strap and skin
- Resistance Test Range : 750KΩ ~ 10MΩ
- Changeover Point : ±10%
- Dimensions (approx.) : 117mm (L) x 80mm (W) x 40mm (H)
- Weight (approx.) : 110 grams
- Power Supply : 9V Battery
- Grounding Wire : 2.5 meter
- Wrist Strap Tester Model 498
- Power Supply: 9V Battery
- Grounding Wire: 2.5 meter
ESD Wrist Straps are the primary method to minimize the static charge on the human body. They must be able to drain this charge as rapidly as it is generated. For this reason it is important to test wrist straps on a regular basis to ensure they are working properly. To ensure the proper working of Wrist Straps, this model 498 is used to check the grounding quickly.
