Desoldering Wick

> > "Desoldering Wick"
Super Fine Mesh High Quality Desoldering Wick P/N: ZD-180

Super Fine Mesh High Quality Desoldering Wick
P/N: ZD-180

Also available in ESD Safe spools & in vacuum packing for MOQ 500 Pcs.

Features:

  • High quality Desoldering Wick with no clean flux
  • Pure oxygen-free copper wire
  • Width: 2mm
  • Length: 1.5 meter

Divider

Super Fine Mesh 0.5 mm width Desoldering Wick P/N: IDW-0.5

Super Fine Mesh 0.5 mm width Desoldering Wick
P/N: IDW-0.5

Specifications:

  • High quality Desoldering Wick with no clean flux
  • Pure oxygen-free copper wire
  • Width: 0.5mm
  • Length: 1.5 meter

Divider

Hi-End No Clean German Desoldering Wicks, Space Grade Level

Hi-End No Clean German Desoldering Wicks, Space Grade Level
P/N: IDW-NC00 – Width 0.8mm, length 1.5 m, P/N: IDW-NCAA – Width 1.5mm, length 1.5 m

Specifications:

  • Faster and increased solder absorption.
  • Heat stable coating, vacuum packed.
  • Negligible residues which are non-corrosive, clear and non-hygroscopic.
  • Uses a special halide-free no-clean, flux-coated copper braid designed to improve wicking.The wick remains flexible and
    will not flake.
  • Supplied on static dissipative spools conforming to DOD Standard 1686 and DOD Handbook 263 for static discharge protection and m eets decay rate provision of MIL-B-81705B.
  • Specially processed copper braid is coated with reduced volume of special halide free synthetic resin.Quantity of residue after use,is significantly less than with conventional wick.
  • PCBs will pass the MIL-P-28809A Cleanliness Test without cleaning, provided a No Clean Flux and Clean System and Components are used.
  • Shelf life: Due to the nature of the flux coating, STANNOL No Clean Wick does not lose its efficiency even after prolonged storage in humid conditions whereas conventional resin coated wicks may lose their efficiency under such conditions.

Divider