SMD Rework Station · Desoldering Station

> "SMD Rework Station · Desoldering Station"

Divider

We provide reliable and effective Hot Air Stations for SMD reworking and high power Desoldering Station for thru-hole components. We stock all necessary consumables and spare parts for these stations, normally with immediate delivery.

Divider

Divider

Divider

Desoldering Station Model DDS01

High Power (150W) Thru Hole Digital Desoldering Station
Model: IDS150

IDS150 Desoldering Station is a 150 Watt High Power for multilayer PCBs & heavy grounded joints.

  • CH1, CH2 & CH3:
    These channels are used to store 3 different frequently used temperatures. Stored temperatures can be recalled just by pressing respective CH button.
  • Password Protection:
    Password is provided for supervisory control. Once the password is applied then no one can change the set parameters without entering the password.
  • Sleep Time Setting:
    Sleep mode is prolongs the life of Heating Element and Desoldering Nozzles. It can be programmed from 01 ~ 20 minutes. 00 indicates no sleep. The system enters in sleep mode if it is not used for set time after putting on the stand. In sleep mode display shows “---”
  • Standby Time Setting:
    Standby time can be programmed from 01 ~ 40 minutes. 00 indicated no standby. Standby timer starts once the unit enters the sleep mode. When the system is in standby mode display will shows “OFF”
  • Temperature Calibration:
    This system has in-built calibration feature to meet ISO requirements. This is recommended every time when the heating element or nozzle is replaced.
  • Input Supply: 230 VAC, 50Hz
  • Heating Power: 150 Watt
  • Temperature Range: 300°C ~ 480°C
  • Vacuum Pressure: 650mm Hg
  • Tip to Ground Potential: <2mV
  • Tip to Ground Resistance: <2 Ohm
  • IDS150 Power/Control Unit
  • IDP150 Desoldering Gun
  • Desoldering Bit
  • Heavy Duty Support Rack
  • Cleaning Sponge
  • Operating Manual

Divider

2-in-1 Combo SMD Hot Air Reworking & Soldering Station IRS2C

2-in-1 Combo SMD Hot Air Reworking & Soldering Station
Model: IRS2C

In-built Password Lock Function and Digital Temperature Calibration provision.

Hot Air SMD Reworking Side

  • High heat power and high air flow volume provides easy and fast desoldering of large QFPs & PLCCs
  • Variety of Hot Air Nozzles available for different sizes of SMD ICs like QFPs, PLCCs, SOPs.
  • Push Buttons for precise temperature adjustment
  • Precise temperature control, not affected by airflow
  • Has a powerful maintenance-free Brushless Motor
  • Airflow is adjustable with Push Buttons
  • In-built password protection and key-lock functions
  • Auto-sleep feature allows system to go into standby mode to prolong the life of heater.
  • Auto cooling also prolong the life of heater and protect the handle from heating

Fine-Pitch SMD & Leadfree Soldering Side

  • Push Buttons for precise temperature adjustment
  • Precise temperature control
  • Suitable for soldering leadfree & SMD components
  • In-built password protection and key-lock functions
  • Auto-sleep feature allows system to go into stand-by mode to prolong the life of heater and Soldering Tips
  • In-built digital temperature calibration facility to meet ISO requirements
  • Various error message indication enables the user to rectify the fault immediately.
  • Lightweight and comfortable for fatigue-free working
  • Main Power & Control Unit
  • Hot Air Pencil with Stand
  • Soldering Pencil with Stand & Cleaning Sponge
  • Three Round Hot Air Nozzles

2-in-1 Combo SMD Hot Air Reworking & Soldering Station Model 712

Divider

1000 Watt High Power Hot Air Rework Station
Model: HAS6DW

One Station suffices 0402 miniature Chips to large size (42.5x42.5 mm) SMD ICs.

  • High heat power and air flow volume for easy and fast desoldering of large QFPs & PLCCs
  • Variety of Hot Air Nozzles available for different sizes of SMD ICs like QFPs, PLCCs, SOPs.
  • Push Buttons for precise temperature adjustment.
  • Precise temperature control, not affected by airflow.
  • Has a powerful maintenance-free Brushless Motor.
  • Airflow is adjustable with Push Buttons.
  • Suitable for desoldering leadfree components.
  • Feature to store 3 ‘favourite’ Temperature & Air. Flow settings in Channels “CH1, CH2 & Ch3”.
  • Password protection and key-lock functions.
  • Auto-sleep feature allows system to go into stand-by mode to prolong the life of heater.
  • Auto cooling also prolongs the life.
  • Power : 1000 Watt
  • Input Supply : 230VAC, 50Hz
  • Temperature Range : 100°C ~500°C
  • Airflow Range : 1 ~ 120 litre/min
  • Dimension (approx.) : 188 x 245 x 135mm
  • Weight (approx.) : 3.65 Kg
  • HAS6DW Main Power & Control Unit
  • Hot Air Pencil
  • Support Rack
  • Pick-up Tool
  • Three Round Hot Air Nozzles

The HAS6DW rework station is a high-powered hot air soldering and desoldering system designed for use with surface-mount components. It features a main power and control unit, a hot air pencil, a support rack, a pick-up tool, and one round hot air nozzle.

The system is capable of delivering up to 1000 watts of power and has an input supply of 230VAC at 50Hz. The temperature range of the system is between 100°C and 500°C, which is suitable for working with a variety of surface-mount components. The airflow range is between 1 and 120 litres per minute, which can be adjusted with push buttons.

One of the key features of the HAS6DW rework station is its three working channels, CH1, CH2, and CH3. Each channel can be set to the desired temperature and airflow volume, which can then be easily selected using the system's push buttons. The system also allows users to store three "favourite" temperature and airflow settings in each of the three channels.

The HAS6DW rework station is suitable for desoldering lead-free components, and it has a variety of hot air nozzles available for use with different sizes of surface-mount components. These include nozzles suitable for PLCCs, LCC leadless chip carriers, flat packs, large QFPs with up to 304 pins, ceramic quad flat packs, and thin SOP ICs.

The system also features a powerful, maintenance-free brushless motor and an automatic cooling function for the hot air handle. These features help to extend the life of the heating element and protect the hot air handle from damage.

Other features of the HAS6DW rework station include password protection and key-lock functions for security, as well as an auto-sleep function that allows the system to go into standby mode to prolong the life of the heater. The system's compact dimensions, which are approximately 188 x 245 x 135mm, and lightweight construction, which weighs approximately 3.65kg, make it easy to use in a variety of work environments.

Wide range of Hot Air Nozzles are available to solder and desolder.

Working Video of 1000 Watt High Power Hot Air Rework Station Model HAS6DW

Divider

1300 Watt High Power Hot Air Rework Station
Model: HRS61D

One Station suffices 0402 miniature Chips to large size (42.5x42.5 mm) SMD ICs.

  • High heat power and air flow volume for easy and fast desoldering of large QFPs & PLCCs
  • Variety of Hot Air Nozzles available for different sizes of SMD ICs like QFPs, PLCCs, SOPs
  • Push Buttons for precise temperature adjustment
  • Precise temperature control, not affected by airflow
  • Has a powerful maintenance-free Brushless Motor
  • Airflow is adjustable with Push Buttons
  • Suitable for desoldering leadfree components
  • Feature to store 3 ‘favourite’ Temperature & Air Flow settings in Channels “CH1, CH2 & Ch3”
  • Password protection and key-lock functions
  • Auto-sleep feature allows system to go into stand-by mode to prolong the life of heater
  • Auto cooling also prolong
  • Power : 1300 Watt
  • Input Supply : 230VAC, 50Hz
  • Temperature Range : 100°C ~500°C
  • Airflow Range : 1 ~ 200 litre/min
  • Dimension (approx.) : 188 x 245 x 135mm
  • Weight (approx.) : 3.65 Kg
  • HRS61D Main Power & Control Unit
  • Hot Air Pencil
  • Support Rack
  • Pick-up Tool
  • Three Round Hot Air Nozzles

1300 Watt High Power Hot Air Rework Station Model HRS61D is engineered with precision in tandem with predefined market quality policies using high quality components and modern technology under the stern guidance of our hardworking team of professionals. Additionally, we offer this rework station at market leading price to our esteemed clients.

We offer wide range of Hot Air Nozzles for solder and desolder. This Rework Station is ideal for Large PLCCs like PLCC 84, LCC leadless Chip Carrier, Flat Packs, Large QFPs as 208 & 304 Pins, Ceramic Quad Flat Packs, Thin SOP ICs.

Working demo video of HRS61D 1300 Watt High Power Hot Air Rework Station

Troubleshooting video of HRS61D 1300 Watt High Power Hot Air Rework Station

Divider

3-in-1 SMD & Thru-Hole Rework System Model IMFS600

3-in-1 SMD & Thru-Hole Rework System
Model: IMFS600

  • High Power Hot Air Pencil with in-built Vacuum Pick-up
  • 110 Watt Soldering Pencil fitted with 2.4mm Chisel Soldering Tip
  • Wide range of Hot Air Nozzles with in-built Vacuum Pick-up for Large SMD ICs
  • Also includes in-built Computer Interface with Parameters Monitoring Software
  • Includes Hot Air Pencil Stand integrated with adjustable PCB Fixture
  • 1300 Watt High Power Hot Air Pencil provides airflow upto 120 litre/minute
  • For multi-layer & heavy mass PCBs, optional IR Pre-Heating Plate available
  • 150 Watt High Power Desoldering Gun fitted with Desoldering Nozzle
  • Support Rack with Cleaning Sponge for Desoldering Gun
  • Power : 1600 Watt
  • Temperature Range :
    • Soldering/Desoldering : 200°C ~ 480°C
    • Hot Air Pencil : 100°C ~ 500°C
  • Airflow Range : upto 120 litre/minute
  • Password Locking for supervisory control
  • Sleep Timer to prolong the life of the system
  • Built-in temperature calibration feature to meet ISO requirements
  • Vacuum Suction : 600mm Hg
  • IMFS-600 Main Control Unit & Power
  • AFHAPS Adjustable PCB Fixture with Hot Air Pencil Stand
  • High Power (1300 Watt) Hot Air Pencil with in-built vacuum Pick-up and Hot Air Pencil Stand
  • 2 Round Hot Air Nozzles of 6.4mm & 12.7mm dia.
  • 110 Watt Soldering Pencil fitted with 2.4mm Chisel Soldering Tip and Support Rack with both Cleaning Sponge/Dry Cleaner
  • 150 Watt Desoldering Gun fitted with Desoldering Nozzle and Support Rack with Cleaning Sponge
  • 2 different sizes of Desoldering Nozzles
  • Spare Ceramic Paper Filter, Spare Spring Filter
  • Cleaning Pin Set, Software CD and Interface Cable

The IMFS-600 is a rework/repair system designed for SMD and through-hole components. It is capable of performing three functions independently: hot air reflow, desoldering, and soldering without external compressor. The system includes a high-power hot air pencil with an in-built vacuum pick-up, a soldering pencil with a chisel tip, and a desoldering gun with a desoldering tip. The hot air pencil has a wide range of nozzles suitable for reworking large SMD ICs, and the system also includes an adjustable PCB fixture and a support rack with cleaning sponge for the desoldering gun.

With a power of 1600 watts, the system has a temperature range of 200°C to 480°C for soldering/desoldering and 100°C to 500°C for the hot air pencil. It has a maximum airflow of 120 liters/minute and a vacuum suction of 600mm Hg. The system also features an in-built computer interface with parameters monitoring software, making it a versatile and efficient tool for repairing and reworking electronic components.

This system is ideal for Fine pitch SMD Soldering, Thru-hole Soldering, Large SMD IC Reworking,  Thru-hole Desoldering.

New Video of MFRS500SUSB Rework/Repair System

Overview Video

Working Video

Divider

Programmable High Performance IR Pre-heating Plate IHP400

Programmable High Performance IR Pre-heating Plate
Model: IHP400

The IHP400 Pre-heating Plate enhances the effectiveness of the IMFS600 Rework Systems. It provides bottom heating to the PCB under repair, therefore minimizing the risk of thermal damage to expensive SMD ICs and warping of expensive multilayer PCBs. Additionally it also speeds up the rework/repair process.

  • High-quality, long life IR Ceramic Heating Elements ensure fast and even pre-heating with high efficiency.
  • In-built temperature measurement with thermocouple allows continuous monitoring of PCB temperature.
  • Pre-set temperature is achieved accurately and remains stable due to closed loop PID control design.
  • TFT LCD display for accurate temperature and other parameters
  • Fast and convenient in-built digital temperature calibration
  • Three-Channel temperature design for easy and fast temperature switching
  • Heating Power : 400 Watt
  • Heating Area : 130 x 130mm
  • Heating Source : IR Ceramic Heater
  • Temperature Range : 50°C ~ 500°C
  • Temperature Stability : ±1°C
  • Temperature Sensor : K-type Thermocouple
  • Measurement Range : 0 ~ 600°C
  • Thermometer Accuracy : ±5°C
  • IHP400 IR Pre-heating Plate
  • K-type Thermocouple
  • Instruction Manual

Why bottom Preheating is recommended ?

Today’s electronics design has higher density of expensive devices on the multilayer PCBs which inherently require gentle pre-heating of PCBs to avoid thermal damaging of expensive SMD ICs, and also must avoid warping of PCBs.

If pre-heating is not used, it can lead to pad lifting, delamination, warping and burning of expensive PCBs & large SMD ICs during rework/repair. Beside these visible defects, the invisible defects like internal layer cracking etc. will also result if pre-heating is not used.

IHP400-Description

To avoid above failures, PCBs will normally need even pre-heating around 120°C on bottom side while reworking. The Pre-heater model IHP400 serves this purpose. PCBs  are heated evenly and gently from bottom side for safe reworking of SMD ICs.

 

Divider