SMD Rework Station · Desoldering Station

Shop online INDE SMD Rework Station, Quick/INDE Desoldering Station in India. 100% reliability @40% discount price. SMD Rework Stations (Hot Air Rework Stations/ Systems), Desoldering Station for SMD ICs (as large as 50 x 50mm size, also for BGA Rework Station). Unique in-built Vacuum Suction providing in Hot Air Pencil to desolder SMD ICs gently without damaging SMD pads on expensive multiplayer PCB boards. In the same system, also included are independent Thru-hole Desoldering and SMD Soldering Pencils.

All SMD Rework Stations / Desoldering Stations listed in our website are normally available with immediate delivery and at very competitive price in India - we also stock all spare parts.

We have in stock 1000 Watt High Power Hot Air SMD Rework Station (HAS6DW), 3-in-1 SMD & Thru-Hole Rework Station (MFRS-500SUSB), Multi Function Rework Station (I702ESD), 1300 Watt High Power Hot Air Rework Station (HRS61D), Reliable Low Cost 700 Watt Hot Air Station (HAS58D), Low Cost Thru-Hole Digital Desoldering Station (DDS01).

Divider

Desoldering Station Model DDS01

High Power (150W) Thru Hole Digital Desoldering Station
Model: IDS150

IDS150 Desoldering Station is a 150 Watt High Power for multilayer PCBs & heavy grounded joints.

  • CH1, CH2 & CH3:
    These channels are used to store 3 different frequently used temperatures. Stored temperatures can be recalled just by pressing respective CH button.
  • Password Protection:
    Password is provided for supervisory control. Once the password is applied then no one can change the set parameters without entering the password.
  • Sleep Time Setting:
    Sleep mode is prolongs the life of Heating Element and Desoldering Nozzles. It can be programmed from 01 ~ 20 minutes. 00 indicates no sleep. The system enters in sleep mode if it is not used for set time after putting on the stand. In sleep mode display shows “---”
  • Standby Time Setting:
    Standby time can be programmed from 01 ~ 40 minutes. 00 indicated no standby. Standby timer starts once the unit enters the sleep mode. When the system is in standby mode display will shows “OFF”
  • Temperature Calibration:
    This system has in-built calibration feature to meet ISO requirements. This is recommended every time when the heating element or nozzle is replaced.
  • Input Supply: 230 VAC, 50Hz
  • Heating Power: 150 Watt
  • Temperature Range: 300°C ~ 480°C
  • Vacuum Pressure: 650mm Hg
  • Tip to Ground Potential: <2mV
  • Tip to Ground Resistance: <2 Ohm
  • IDS150 Power/Control Unit
  • IDP150 Desoldering Gun
  • Desoldering Bit
  • Heavy Duty Support Rack
  • Cleaning Sponge
  • Operating Manual

Divider

2-in-1 Combo SMD Hot Air Reworking & Soldering Station
Model: 712

In-built Password Lock Function and Digital Temperature Calibration provision.

Hot Air SMD Reworking Side

  • High heat power and high air flow volume provides easy and fast desoldering of large QFPs & PLCCs
  • Variety of Hot Air Nozzles available for different sizes of SMD ICs like QFPs, PLCCs, SOPs.
  • Push Buttons for precise temperature adjustment
  • Precise temperature control, not affected by airflow
  • Has a powerful maintenance-free Brushless Motor
  • Airflow is adjustable with Push Buttons
  • In-built password protection and key-lock functions
  • Auto-sleep feature allows system to go into standby mode to prolong the life of heater.
  • Auto cooling also prolong the life of heater and protect the handle from heating

Fine-Pitch SMD & Leadfree Soldering Side

  • Push Buttons for precise temperature adjustment
  • Precise temperature control
  • Suitable for soldering leadfree & SMD components
  • In-built password protection and key-lock functions
  • Auto-sleep feature allows system to go into stand-by mode to prolong the life of heater and Soldering Tips
  • In-built digital temperature calibration facility to meet ISO requirements
  • Various error message indication enables the user to rectify the fault immediately.
  • Lightweight and comfortable for fatigue-free working
  • Main Power & Control Unit
  • Hot Air Pencil with Stand
  • Soldering Pencil with Stand & Cleaning Sponge

2-in-1 Combo SMD Hot Air Reworking & Soldering Station Model 712

Divider

1000 Watt High Power Hot Air Rework Station
Model: HAS6DW

One Station suffices 0402 miniature Chips to large size (42.5x42.5 mm) SMD ICs.

  • High heat power and air flow volume for easy and fast desoldering of large QFPs & PLCCs
  • Variety of Hot Air Nozzles available for different sizes of SMD ICs like QFPs, PLCCs, SOPs.
  • Push Buttons for precise temperature adjustment.
  • Precise temperature control, not affected by airflow.
  • Has a powerful maintenance-free Brushless Motor.
  • Airflow is adjustable with Push Buttons.
  • Suitable for desoldering leadfree components.
  • Feature to store 3 ‘favourite’ Temperature & Air. Flow settings in Channels “CH1, CH2 & Ch3”.
  • Password protection and key-lock functions.
  • Auto-sleep feature allows system to go into stand-by mode to prolong the life of heater.
  • Auto cooling also prolongs the life.
  • Power : 1000 Watt
  • Input Supply : 230VAC, 50Hz
  • Temperature Range : 100°C ~500°C
  • Airflow Range : 1 ~ 120 litre/min
  • Dimension (approx.) : 188 x 245 x 135mm
  • Weight (approx.) : 3.65 Kg
  • HAS6DW Main Power & Control Unit
  • Hot Air Pencil
  • Support Rack
  • Pick-up Tool
  • One Round Hot Air Nozzle

The HAS6DW rework station is a high-powered hot air soldering and desoldering system designed for use with surface-mount components. It features a main power and control unit, a hot air pencil, a support rack, a pick-up tool, and one round hot air nozzle.

The system is capable of delivering up to 1000 watts of power and has an input supply of 230VAC at 50Hz. The temperature range of the system is between 100°C and 500°C, which is suitable for working with a variety of surface-mount components. The airflow range is between 1 and 120 litres per minute, which can be adjusted with push buttons.

One of the key features of the HAS6DW rework station is its three working channels, CH1, CH2, and CH3. Each channel can be set to the desired temperature and airflow volume, which can then be easily selected using the system's push buttons. The system also allows users to store three "favourite" temperature and airflow settings in each of the three channels.

The HAS6DW rework station is suitable for desoldering lead-free components, and it has a variety of hot air nozzles available for use with different sizes of surface-mount components. These include nozzles suitable for PLCCs, LCC leadless chip carriers, flat packs, large QFPs with up to 304 pins, ceramic quad flat packs, and thin SOP ICs.

The system also features a powerful, maintenance-free brushless motor and an automatic cooling function for the hot air handle. These features help to extend the life of the heating element and protect the hot air handle from damage.

Other features of the HAS6DW rework station include password protection and key-lock functions for security, as well as an auto-sleep function that allows the system to go into standby mode to prolong the life of the heater. The system's compact dimensions, which are approximately 188 x 245 x 135mm, and lightweight construction, which weighs approximately 3.65kg, make it easy to use in a variety of work environments.

Wide range of Hot Air Nozzles are available to solder and desolder.

Working Video of 1000 Watt High Power Hot Air Rework Station Model HAS6DW

Divider

3-in-1 SMD & Thru-Hole Rework System
Model: MFRS-500SUSB

  • High Power Hot Air Pencil with in-built Vacuum Pick-up
  • Soldering Pencil fitted with 2.4mm Chisel Soldering Tip
  • Wide range of Hot Air Nozzles with in-built Vacuum Pick-up for Large SMD ICs
  • Also includes in-built Computer Interface with Parameters Monitoring Software
  • Includes Hot Air Pencil Stand integrated with adjustable PCB Fixture
  • 1000 Watt High Power Hot Air Pencil provides airflow upto 120 litre/minute
  • For multi-layer & heavy mass PCBs, optional IR Pre-Heating Plate available
  • Desoldering Gun fitted with Desoldering Tip
  • Support Rack with Cleaning Sponge for Desoldering Gun
  • Power : 1180 Watt
  • Temperature Range :
    • Soldering/Desoldering : 200°C ~ 480°C
    • Hot Air Pencil : 100°C ~ 500°C
  • Airflow Range : upto 120 litre/minute
  • Vacuum Suction : 600mm Hg
  • MFRS-500SUSB Main Control Unit
  • High Power Hot Air Pencil with in-built Vacuum Pick-up
  • Hot Air Pencil Holder
  • Soldering Pencil fitted with 2.4mm Chisel Soldering Tip
  • Support Rack with Cleaning Sponge and Dry Cleaner
  • Desoldering Gun fitted with Desoldering Tip
  • Support Rack with Cleaning Sponge for Desoldering Gun

The MFRS-500SUSB is a rework/repair system designed for SMD and through-hole components. It is capable of performing three functions independently: hot air reflow, desoldering, and soldering without external compressor. The system includes a high-power hot air pencil with an in-built vacuum pick-up, a soldering pencil with a chisel tip, and a desoldering gun with a desoldering tip. The hot air pencil has a wide range of nozzles suitable for reworking large SMD ICs, and the system also includes an adjustable PCB fixture and a support rack with cleaning sponge for the desoldering gun.

With a power of 1180 watts, the system has a temperature range of 200°C to 480°C for soldering/desoldering and 100°C to 500°C for the hot air pencil. It has a maximum airflow of 120 liters/minute and a vacuum suction of 600mm Hg. The system also features an in-built computer interface with parameters monitoring software, making it a versatile and efficient tool for repairing and reworking electronic components.

This system is ideal for Fine pitch SMD Soldering, Thru-hole Soldering, Large SMD IC Reworking,  Thru-hole Desoldering.

New Video of MFRS500SUSB Rework/Repair System

Overview Video

Working Video

Divider

Function Rework System – Model I702ESD

Multi Function Rework System
Model: I702ESD

  • Brand-new I702 rework system which can meet various requirement of soldering Desoldering of SMD’s, PTH etc.
  • 3-in-1 system contains Hot Air Iron, Desoldering Iron and Soldering Iron in 1 unit
  • Independent control of all 3 tools
  • ESD safe by design
  • Air Pump : Diaphragm
  • Air Volume : < 24L/min
  • Temperature Range : 150o -500o
  • Power Consumption : 520W
  • Dimensions : 335(L) x 253(W) x 160(H)mm
  • Weight : About 13.3kg
Soldering:
  • Output Voltage : 24V AC
  • Temperature Range : 200°C ~ 480°C
  • Temperature Stability : +/-1°C (stationary air, no load)
SMD Rework:
  • Output Voltage : 220V AC
  • Air Pump : Diaphragm
  • Air Volume : 24L/min
  • Temperature Range : 150°C ~ 500°C
Desoldering:
  • Output Voltage : 36V AC
  • Pump : Diaphragm
  • Vacuum : 600 mm Hg
  • Inhalation : 15L/min
  • Temperature Range : 320°C ~ 480°C
  • I702 Main power & Control unit
  • Hot Air Iron
  • Desoldering Iron
  • Soldering Iron

Multi Function Rework System Model I702ESD has a Integrated function of hot air and soldering iron, more convenient for use and covering less work space. Monitor bit & hot air temperature intelligently with perfect temperature offset to ensure soldering quality.

Divider

1300 Watt High Power Hot Air Rework Station
Model: HRS61D

One Station suffices 0402 miniature Chips to large size (42.5x42.5 mm) SMD ICs.

  • High heat power and air flow volume for easy and fast desoldering of large QFPs & PLCCs
  • Variety of Hot Air Nozzles available for different sizes of SMD ICs like QFPs, PLCCs, SOPs
  • Push Buttons for precise temperature adjustment
  • Precise temperature control, not affected by airflow
  • Has a powerful maintenance-free Brushless Motor
  • Airflow is adjustable with Push Buttons
  • Suitable for desoldering leadfree components
  • Feature to store 3 ‘favourite’ Temperature & Air Flow settings in Channels “CH1, CH2 & Ch3”
  • Password protection and key-lock functions
  • Auto-sleep feature allows system to go into stand-by mode to prolong the life of heater
  • Auto cooling also prolong
  • Power : 1300 Watt
  • Input Supply : 230VAC, 50Hz
  • Temperature Range : 100°C ~500°C
  • Airflow Range : 1 ~ 200 litre/min
  • Dimension (approx.) : 188 x 245 x 135mm
  • Weight (approx.) : 3.65 Kg
  • HRS61D Main Power & Control Unit
  • Hot Air Pencil
  • Support Rack
  • Pick-up Tool
  • One Round Hot Air Nozzle

1300 Watt High Power Hot Air Rework Station Model HRS61D is engineered with precision in tandem with predefined market quality policies using high quality components and modern technology under the stern guidance of our hardworking team of professionals. Additionally, we offer this rework station at market leading price to our esteemed clients.

We offer wide range of Hot Air Nozzles for solder and desolder. This Rework Station is ideal for Large PLCCs like PLCC 84, LCC leadless Chip Carrier, Flat Packs, Large QFPs as 208 & 304 Pins, Ceramic Quad Flat Packs, Thin SOP ICs.

Working demo video of HRS61D 1300 Watt High Power Hot Air Rework Station

Troubleshooting video of HRS61D 1300 Watt High Power Hot Air Rework Station

Divider

Reliable Low Cost 700 Watt Hot Air Station Model HAS58D

Reliable Low Cost 700 Watt Hot Air Station
Model: HAS58D

For heat shrinking, drying and reworking of SMD components on PCBs.

  • Controlled gentle hot airflow makes it ideal for rework of miniature SMD chips, SOTs, SOICs.
  • Different Hot Air Nozzles available for reworking of different types SMD components.
  • Push Buttons for precise temperature control.
  • Suitable for reworking of Leadfree components.
  • Induction Switch in Handle ensures automatic starting when in use. This feature saves electrical energy and prolongs the life of heating element.
  • Compact and durable, takes up little space.
  • Reliable Brushless Fan with very low noise.
  • Power : 700 Watt
  • Input Supply : 230 VAC, 50 Hz
  • Temperature Range : 100°C ~ 450°C
  • Airflow type : Brushless fan
  • Air Volume : 120 litre/minute (Max.)
  • Display type : Digital, LED
  • Dimensions (approx.) : 138 x 100 x150 (mm)
  • Weight (approx.) : 1.7 Kg
  • HAS58D Main Control Unit
  • Hot Air Pencil with Round Nozzle

Reliable Low Cost 700 Watt Hot Air Station Model HAS58D can be used for heat shrinking, drying and reworking of SMD components on PCBs. It is also used to melt material or softening coatings, plastic, applicable to remove old paint film, remove non-dry tape, bending plastic tube, and outfit floor tile, heat shrinkable packaging film, mobile phone service, car decoration, refrigerator defrosting purposes.

Divider

Desoldering Station Model DDS01

Low Cost Thru-Hole Digital Desoldering Station
Model: DDS01

The INDE DDS01 is a powerful low cost vacuum desoldering station that is ideal for the desoldering of all type of thru-hole components. Now no more clogging of desoldering nozzles and the desoldering gun also has an indication LED that indicates when the nozzle and/or heating element should be cleaned and when the filter should be replaced.

  • Desoldering Gun design ensures no clogging of Desoldering Nozzles
  • Powerful Japanese Vacuum Pump provides 600mm-Hg Vacuum Suction
  • 90 Watt High Heat Power makes it suitable for reworking of Leadfree PCBs
  • Digitized Push Buttons provide precise temperature control
  • Assured availability, normally ex-stock, of Spare Parts of Desoldering Gun
  • Heavy Duty Support Rack
  • Cleaning Sponge
  • Input Supply : 230 VAC, 50Hz
  • Heating Power : 90 Watt
  • Temperature Range : 200°C ~ 450°C
  • Vacuum Pressure : 600mm Hg
  • Tip to Ground Potential : <2mV
  • Tip to Ground Resistance : <2 Ohm
  • DDS01 Power & Control Unit
  • DDP01 Desoldering Gun
  • Desoldering Bit
  • Heavy Duty Support Rack
  • Cleaning Sponge
  • Operating Manual

DDS01 Digital Desoldering Station Gun With Internal Vacuum PumpPowerful built-in vacuum pump. Precise temperature control with closed-loop sensor. 36 V low-voltage heater, fully isolated, safe and reliable. LED digital display, auto sleep function. Specially designed suction nozzle and heater. Long lifetime heater. Lead-free desoldering gun. ESD protection.

DDS01 Desoldering Station is available for sale throughout India via COD and you may get it from our regional offices in Mumbai, Bangalore, Chennai, Delhi, Chandigarh and Kolkatta.

Overview Video on Desoldering Station DDS01

Divider

Rework/Repair & Soldering Package for SMD Chips & ICs

Rework/Repair & Soldering Package for SMD Chips & ICs
Model: MFRS500SUSB-SH

Scope of supply:
  • MFRS-500SUSB Main Control Unit
  • High Power Hot Air Pencil with in-built vacuum pick-up
  • Adjustable PCB Fixture with UP/DOWN Hot Air Pencil Holder
  • Soldering Pencil fitted with 2.4mm Chisel Soldering Tip
  • Support Rack with Cleaning Sponge and Dry Cleaner
  • Desoldering Gun fitted with Desoldering Tip
  • Support Rack with Cleaning Sponge for Desoldering Gun
  • ESD Safe Superfine Tip SMD Tweezer
  • Spring loaded SMD Flux Pen
  • Desoldering Wick 2.0mm width
  • Stannol Germany Solder Wire 0.7mm, 500 grams
  • ESD Safe Table Mat (60x120cm)
  • CK Tools Germany SMD Tip Cutter
  • Weller Soldering Tip Activator
  • ESD Safe Illuminated Magnifer

Divider

Integrated SMD/PTH Multi-Function Rework Package

Integrated SMD/PTH Multi-Function Rework Package
Package: SMDRWP-MF500-PK551

Scope of supply:
  • SMDRWP-MF500-PK55-Del Integrated Package Include:
  • MFRS500 Multifunction Set • SMD Hot Air Nozzles Set
  • IR Preheater, IRPH-4 • Vacuuum Pick-up, Electric type
  • Fume Absorber, FumePro201-50 • Table Top LED Magnifier
  • Visual Inspection (VideoScope MagnaPro35B) • Solder Wire Stand
  • Solder Wire Roll, 250 gms: 2 nos. • Desoldering Wick: 3 nos.
  • Tip Activator • Flux Pen: 2 nos.
  • Flux Bottle: 2 nos. • Dispenser Bottle: 2 nos.
  • Soldering Ait Kit • PLCC Extractor
  • SMD Vacuum Pick-up Pen • Fine Tip Curved Tweezer: 2 nos.
  • ESD Safe Soft Tip Tweezer • SMD Tweezer
  • Cutting Pliers: 2 nos. • PCB Holder
  • ESD Safe Cleaning Brush, E2: 2 nos. • ESD Mat Kit
  • ESD Safe Cleaning Brush, A2: 2nos • Vacu-Vice

Divider