Stannol Solder Wire: Leadfree or Leaded

Stannol Solder Wire

You are at the right place to buy the best quality German make Stannol Solder Wire at discounted price. We supply Leadfree and Leaded Solder Wires in different diameters with Silver or without Silver contents. Normally ex-stock delivery in India.

Soldering wire is a metal alloy wire used to join two or more metal surfaces together by melting the wire to form a permanent bond. The composition of the soldering wire typically includes a combination of tin, lead, and other metals such as silver, copper, and zinc.

The wire diameter ranges from 0.5mm to 3mm, and the most common size used is 1mm. The wire is available in a variety of forms such as rosin-core, acid-core, and flux-coated. The flux in the wire helps to clean and prepare the surface of the metal by removing any oxides or impurities, which allows for better adhesion of the solder.

The melting point of the soldering wire is typically lower than the melting point of the metals being joined. This allows the wire to melt and flow into the joint while the metal surfaces remain solid. The melting point of the soldering wire can vary depending on the composition, with lead-free soldering wire having a higher melting point than lead-based soldering wire.

The wire is commonly used in electronics, plumbing, and metalworking applications. It is important to choose the correct type of soldering wire for the job, as different alloys have different properties such as melting point, strength, and corrosion resistance. Additionally, it is important to use appropriate safety measures when handling and using soldering wire, as the fumes produced during the soldering process can be harmful if inhaled for that INDE Enteprises offer a wide range of Soldering Fume Extraction Systems and Fume Absorbers .

Stannol Solder Wires are considered to be of very high quality and are widely used in the electronics industry for soldering electronic components. Stannol is a German company that has been producing soldering materials for more than 140 years, and their solder wires are known for their reliability, consistency, and ease of use.

Stannol Solder Wires are made from a blend of tin, copper, and sometimes other metals, which gives them good thermal and electrical conductivity. The solder wire also contains a flux core, which helps to clean and prepare the surfaces to be soldered and ensures a strong, long-lasting bond.

In general, Stannol solder wires are easy to work with and produce high-quality solder joints that are resistant to corrosion and mechanical stress. However, like any soldering material, the quality of the joint also depends on the skill and technique of the person doing the soldering. At INDE Enterprises we offer a range of Leaded and Leadfree Stannol Solder Wires as below:

Divider

STANNOL® Leadfree Solder Wire Sn99Cu1
Type: HF-32 Series

STANNOL® HF32 Series can be used for hand-soldering and automatic wire feed operations.

  • Composition : Sn99 Cu1.0
  • Flux Type : Standard 3.5 weight % ± 0.3 %
  • Halide content : None, according to DIN EN ISO 9455-6
  • Corrosion effect : None, according to DIN EN 29455-5 and -15
  • Available diameters : 0.5 mm, 0.7 mm, 1.0 mm
  • Available spool size : 500 gms
  • Lead Free Soldering Wire,
    Sn99Cu1, 0.5 mm, 500g,
    Ordering No.: 648111
  • Lead Free Soldering Wire,
    Sn99Cu1, 0.7 mm, 500g,
    Ordering No.: 648132
  • Lead Free Soldering Wire,
    Sn99Cu1, 1.0 mm, 500g,
    Ordering No.: 648108

Leadfree Solder Wires (without Silver content) available from us, normally with immediate delivery.

Stannol Germany provides wide range of highest quality Solder Wires for different types of soldering applications.

STANNOL® HF32 are recommended for use in both robotic soldering & hand-soldering. For manual soldering, Temperature controlled Soldering Station only should be used to prevent excessive heat being applied. Flux spatter from the formulation is fairly low. STANNOL® Solder Wire HF32 meets the requirements of DIN 8516, with respect to surface insulation resistance and electromigration. The flux residues are not corrosive to non-ferrous metals.

Divider

STANNOL® Leadfree Solder Wire SAC with Silver
Type: HF-32 Series

Leadfree Solder Wires with Silver Contents.

  • Composition : Sn95.5, Ag3.8, Cu0.7
  • Flux type : Standard 3.5 weight % ± 0.3 %
  • Halide content : None, according to DIN EN ISO 9455-6
  • Corrosion effect : None, according to DIN EN 29455-5 and -15
  • Available diameters : 0.3mm, 0.5mm, 0.7mm, 1.0mm, 1.5mm
  • Available spool size : 0.3mm in 250gms; 0.5mm in 500gms; 0.7mm in 500gms; 1.0/1.5mm in 1kg
  • Lead Free Soldering Wire,
    Sn95Ag4Cu1, 0.3mm, 250g,
    Ordering No.: 631970
  • Lead Free Soldering Wire,
    Sn95Ag4Cu1, 0.5mm, 500g,
    Ordering No.: 631962
  • Lead Free Soldering Wire,
    Sn95Ag4Cu1, 0.7mm, 500g,
    Ordering No.: 631967
  • Lead Free Soldering Wire,
    Sn95Ag4Cu1,1.0mm, 500g,
    Ordering No.: 631974

Leadfree Solder Wires (with Silver content) available from us, normally with immediate delivery Solder Wires can be flux-cored or solid. The flux is necessary for the soldering process to remove oxidation and other impurities to guarantee a reliable solder joint. Flux-cored Solder Wires already contain the correct amount of flux. Different fluxes are used depending on the soldering tasks.  

Halide-free Solder Wire Fluxes are used if halides are not permitted in the manufacturing process and if higher electrical safety of the residues is required.  

STANNOL® Leadfree Solder Wires in HF32 series are high quality flux cored types. Activated & halide-free flux, meets DIN EN 29454 type 1.1.3 and IEC 61190-1-3 type ROL0 standard. Flux residues are solid and dry, and are not corrosive when tested in accordance with DIN 8516.

Divider

STANNOL® Leaded Solder Wire
Type: Sn60Pb40

STANNOL® Standard lead containing alloy Sn60Pb40 in various wire diameters.

  • General Properties : Leaded Solder Wires HS10 series
  • Composition : Sn60, Pb40
  • Flux type : Standard 2.5 weight % ± 0.3 %
  • Halide content : 0.9%
  • Corrosion effect : None, according to DIN 8516
  • Available diameters : 0.7 mm, 1.0 mm, 2.0mm, 3.0mm
  • Available spool size : 0.7 ~ 1.0mm in 500 gms; 2.0 ~ 3.0mm in 1kg
  • Leaded Soldering Wire with 2% Silver,
    Sn62Pb36Ag2, 1.0 mm, 500g,
    Ordering No.: 626246
  • Leaded Soldering Wire,
    Sn60Pb40, 2.0 mm, 1000g,
    Ordering No.: 522242
  • Leaded Soldering Wire,
    Sn60Pb40, 3.0 mm, 1000g,
    Ordering No.: 522840
  • Leaded Soldering Wire,
    Sn60Pb40, 1.0 mm, 500g,
    Ordering No.: 520452
  • Leaded Soldering Wire,
    Sn60Pb40, 0.7 mm, 500g,
    Ordering No.: 519244

Solder Wires can be flux-cored or solid. The flux is necessary for the soldering process to remove oxidation and other impurities to guarantee a reliable solder joint. Flux-cored solder wires already contain the correct amount of flux. Different fluxes are used depending on the soldering task.

The HS10 series Solder Wires have rosin flux which has been proven well in application for decades. Short wetting times on common surfaces are achieved with this flux. The flux is suitable for both manual soldering and robot soldering with fast cycle times.

STANNOL® Lead containing Solder Wires in HS10 series are high quality flux cored types. Activated, halide-free flux, meets DIN EN 29454-1 type 1.1.2B and IEC 61190-1-3 type ROM1 standard. The flux residues are solid and dry, and are not corrosive when tested in accordance with DIN 8516.

Divider