Ionizers

Ionizing Air Gun + High Voltage Power Supply

Ionizing Air Gun + High Voltage Power Supply

P/N: 445D+446

The 445D Ionizing Air Gun is used for removing static charge and dust of the inaccessible charged object. It can easily clean the parts and prevent it from being attached again after removing static charge.

Features:
  • Compact design for easy operation
  • Rapidly neutralizes static charges
  • Built-in regulator of remnant voltage for effective ion balancing
  • Two ionizing Air Guns can be connected with High Voltage
    Power Supply model 446 at the same time

Low Voltage Nozzle type Static Charge Eliminator

Low Voltage Nozzle type Static Charge Eliminator

P/N: 449

This Static Charge Eliminator works with low voltage power supply which makes it safe to use very close to the components. The ions are produced by high-frequency voltage in large quantity and high density so that the ions do not disappear during long travelling in the tube.

Specifications:
  • It can transfer ionized air by using the air tube in addition to air blowing directly through the nozzle.
  • Low noise
  • High speed removal of static electricity
  • Reliable and steady ion balancing

Stainless Steel Body Static Charge Eliminator P/N: 440D

Stainless Steel Body Static Charge Eliminator

P/N: 440D

Features:
  • Compact size, light weight, portable design with adjustable angle
  • Rapidly neutralizes static charges
  • Adjustable fan speed can generate large range of ion stream
  • Stable ion balancing
  • Long lifetime magnetic transformer protect the unit from short circuit
  • Built-in emitter cleaner for easy cleaning
  • Stainless steel housing, ideally suitable for clean room applications

Static Eliminator Model: Z207

Static Eliminator Model

Model: Z207

This Bench Top instrument is designed to neutralise your ESD work-station or ESD protected area with a stream of ionized air. It remove static charges from non-conductive objects and surfaces.

Specifications:
  • Air Flow : 1.8 cu m/min
  • Noise level : 45 dbA (at 1m)
  • Supply : 230V AC 50Hz 20 Watts
  • Ionization voltage : 6-8 KV
  • Ion balance : under -/+ 50 V
  • Dimensions : 200 x 170 x 110 mm
  • Weight : 2.75 kgs (approx.)

Overhead Static Eliminator Model: Z209

Overhead Static Eliminator

Model: Z209

This OVERHEAD unit can be conveniently hung over the work area for a large coverage to neutralise the charges on personnel or on any item entering an ESD sensitive area.

Specifications:
  • Air Flow : 425 cu.m/hr
  • Noise level : 55 dbA at 1m
  • Supply : 230V AC 50Hz 70 Watts
  • Ionization Potential : 6-8 KV
  • Ion balance : -/+ 50 V
  • Dimensions : 1100 x 170 x 130 mm
  • Weight : 7 kgs.